PN20/300PSI/Class150
BSEN12288, Threaded Ends Comply to BS21 or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 3.0Mpa/30Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 2.0 Mpa at -20°C-100°C |
PN20/300PSI/Class150
BSEN12288, Threaded Ends Comply to BS21 or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 3.0Mpa/30Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 2.0 Mpa at -20°C-100°C |
| No | Part | Specification | BS EN | ASTM |
| 1 | Body | Cast Bronze | 1982CC490K | B584CA844 |
| 2 | Strainer Screen (20 Mech) |
Stainless Steel | BSEN 10088-1 | 304 SS 20 MESH |
| 3 | Bonnet | Cast Bronze | 1982 CC490K | B584 CA844 |
| 4 | Gasket | NBR | NBR | NBR |
| 5 | Plug | Cast Bronze | 1982 CC490K | B584 CA844 |
Applicable to water supply and drainage pipelines
| mm | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | |
| In | ½ | ¾ | 1 | 1¼ | 1½ | 2 | 2½ | 3 | |
| L | 80 | 100 | 115 | 135 | 160 | 190 | 220 | 265 | |
| H | 48.5 | 58 | 70 | 80 | 93 | 112 | 130 | 146 | |
| D | 14 | 19.5 | 25 | 31.8 | 38.1 | 50 | 63.5 | 76.2 | |
| Weight | Lbs | 0.77 | 1.19 | 1.87 | 2.38 | 4.04 | 6.35 | 9.55 | 13.96 |
| Kg | 0.35 | 0.54 | 0.85 | 1.08 | 1.83 | 2.88 | 4.33 | 6.33 | |
Freezing Weather Precaution: Subsequent to testing a piping system, valves should be left in an open position to allow complete drainage.
Each TALOAR bronze valve has beenthoroughly cleaned and degreasedand packed separately in the sealedpolythene bag.
Copyright © TALOAR All Rights Reserved
