Pressure reducing valves PR500

Home > Products > Product Information > Water Service > Water Control Valves > 500 Series > Pressure reducing valves PR500

All categories

2 ″ - 20 ″

Sensitive and precise pressure control

Easy regulating and maintenance

Excellent and reliable sealing performance

Built-in strainer, to prevent piping system from blocking

Classification: 500 Series

Product Inquiry

Recommended Products

PDF

Overview
List of Accessories
Typical Applications

PR500 pressure reducing valve can automatically reduce high pressure at the inlet to a stable low pressure at the outlet regardless of changes in fluid velocity or inlet pressure, maintain outlet pressure within the preset range by a precise pressure regulator. When outlet pressure exceeds the set range of the pressure reducing valve, the basic valve body and the pressure regulator will automatically close to form a tight seal.

If the optional check feature is selected, when the back pressure generated, the return fluid will enter the air chamber to close the valve to prevent the fluid from back flow.

Material Specifications

Body/Bonnet: Ductile Iron/Stainless Steel

Disc & Stem: Stainless Steel

Piping: Bronze/Stainless Steel/Rubber Hose

Diaphragm: NBR

Fasteners and Springs: Stainless Steel

Working Pressure Range

175PSI/235PSI/350PSI

10Bar/16Bar/25Bar

Flange Standards

ANSI / BSEN / ISO / DIN

Temperature/Medium

0°C~100°C normal temperature water

Pressure Regulator Parameters

Pressure Regulating Range: 0.1~5 kgf/cm², 5~9 kgf/cm², 7~17 kgf/cm²

Pressure Regulator Material: Bronze/Stainless Steel

Please Provide the Following Data When Ordering

Valve figure number/size/pressure grade/connecting end type/pressure regulating range/other optional accessories

Note: In valve installation, it is strongly suggested that sufficient space should be left for easy maintenance in the future. A strainer shall be mounted in front of the valve to prevent foreign matters from blocking the valve.

List of Accessories

① Strainer

② Ball Valve

③ Check Valve (Optional)

④ Needle Type Regulating Valve

⑤ Ball Valve

⑥ Pressure Regulator

⑦ Check Valve (Optional)

⑧ Ball Valve

Typical Applications

If variable and large flow range demands, use multiple PR500 pressure reducing valves in parallel. In case of large flow demand, use two pressure reducing valves simultaneously. In case of small flow demand, the large-sized valve will automatically close, while the small-sized valve will continue to provide the required flow. When setting the pressure regulating range for the valves, the set pressure of the small-sized valve should be about 0.3 kgf/cm² higher than that of the large-sized valve.If the pressure reduction range is large, use multiple PR500 pressure reducing valves in series for sectional pressure reduction.