PN20/300PSI/Class150
Solid Wedge, Non-Rising Stem
BSEN12288, Threaded Ends Comply to BSPT or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 3.0Mpa/30Bar |
| Seat | 2.2Mpa/22Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 2.0 Mpa at -20°C-100°C |
PN20/300PSI/Class150
Solid Wedge, Non-Rising Stem
BSEN12288, Threaded Ends Comply to BSPT or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 3.0Mpa/30Bar |
| Seat | 2.2Mpa/22Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 2.0 Mpa at -20°C-100°C |
| No | Part | Specification | BS EN | ASTM |
| 1 | Body | Brass | CW612N | C3700 |
| 2 | Disc | Brass | CW612N | C3700 |
| 3 | Bonnet | Brass | CW612N | C3700 |
| 5 | Stem Packing | PTFE | PTFE | PTFE |
| 6 | Gland | Brass | CW603N | C3600 |
| 7 | Nut | Brass | CW603N | C3600 |
| 8 | Stem | Brass | CW603N | C3600 |
| 9 | Handwheel | Cast Iron | EN-JL1030 | A126 CLASS B |
| 10 | Handwheel Nut | Steel | -- | A563 Zn PLATED |
| 11 | Nameplate | Aluminum | -- | B209 1100 |
| mm | 15 | 20 | 25 | 32 | 40 | 50 | |
| In | ½ | ¾ | 1 | 1 ¼ | 1 ½ | 2 | |
| L | 41 | 51 | 51 | 55 | 60 | 67 | |
| H(max) | 68 | 76 | 88 | 108 | 120 | 139 | |
| D | 53 | 53 | 60 | 72 | 72 | 80 | |
| P | 13.5 | 18.5 | 25.0 | 31.0 | 37.0 | 44.0 | |
| W | 13.7 | 15.0 | 17.8 | 18.0 | 19.0 | 20.5 | |
| d | 10 | 10 | 10 | 11 | 11 | 12 | |
| Weight | Lbs | 0.55 | 0.79 | 1.1 | 1.68 | 2.09 | 3.26 |
| Kg | 0.25 | 0.36 | 0.50 | 0.76 | 0.95 | 1.48 | |
Freezing Weather Precaution: Subsequent to testing a piping system, valves should be left in an open position to allow complete drainage.
Each TALOAR brass valve has beenthoroughly cleaned and degreasedand packed separately in the sealedpolythene bag.
Copyright © TALOAR All Rights Reserved
