PN20/300PSI/Class150
Screw-in Bonnet, Solid Wedge, Non-Rising Stem
BSEN12288, Threaded Ends Comply to BS21 or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 3.0Mpa/30Bar |
| Seat | 2.2Mpa/22Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 2.0 Mpa at -20°C-100°C |
PN20/300PSI/Class150
Screw-in Bonnet, Solid Wedge, Non-Rising Stem
BSEN12288, Threaded Ends Comply to BS21 or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 3.0Mpa/30Bar |
| Seat | 2.2Mpa/22Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 2.0 Mpa at -20°C-100°C |
| No | Part | Specification | BS EN | AS TM |
| 1 | Body | Cast Bronze | 1982 CC490K | B584 C84400 |
| 2 | Disc | Cast Bronze | 1982 CC490K | B584 C84400 |
| 3 | Bonnet | Cast Bronze | 1982 CC490K | B584 C84400 |
| 4 | Retaining Nut | Brass | 12164 CW603N | B16 C36000 |
| 5 | Stem Packing | PTFE | PTFE | PTFE |
| 6 | Gland | Brass | 12164 CW603N | B16 C36000 |
| 7 | Nut | Brass | 12164C W603N | B16 C36000 |
| 8 | Stem | Brass | 12164 CW603N | B16 C36000 |
| 9 | Handwheel | Cast Iron | EN-JL1030 | A126 CLASS B |
| 10 | Handwheel Nut | Steel | -- | A563 Zn PLATED |
| 11 | Nameplate | Aluminum | -- | B209 1100 |
| mm | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | |
| In | ½ | ¾ | 1 | 1 ¼ | 1 ½ | 2 | 2 ½ | 3 | 4 | |
| L | 47.5 | 51.5 | 58.6 | 63 | 66.5 | 73.5 | 90 | 100 | 122 | |
| H | 78 | 94 | 109 | 120 | 142 | 163 | 207 | 235 | 281 | |
| D | 53 | 64 | 70 | 80 | 90 | 102 | 104 | 118 | 150 | |
| Weight | Lbs | 0.66 | 0.93 | 1.21 | 1.79 | 2.16 | 3.42 | 6.62 | 8.95 | 14.27 |
| Kg | 0.30 | 0.42 | 0.55 | 0.81 | 0.98 | 1.55 | 3.00 | 4.06 | 6.47 | |
Freezing Weather Precaution: Subsequent to testing a piping system, valves should be left in an open position to allow complete drainage.
Each TALOAR bronze valve has beenthoroughly cleaned and degreasedand packed separately in the sealedpolythene bag.
Copyright © TALOAR All Rights Reserved
