PN25/400PSI
Chrome-Plated Ball
BSEN12288, Threaded Ends Comply to BSPT or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 3.75Mpa/37.5Bar |
| Seat | 2.75Mpa/27.5Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 2.5 Mpa at -20°C-100°C |
PN25/400PSI
Chrome-Plated Ball
BSEN12288, Threaded Ends Comply to BSPT or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 3.75Mpa/37.5Bar |
| Seat | 2.75Mpa/27.5Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 2.5 Mpa at -20°C-100°C |
| No | Part | Specification | BS EN | ASTM |
| 1 | Body | Brass | CW612N | C37700 |
| 2 | End Cap | Brass | CW612N | C37700 |
| 3 | Seat | PTFE | PTFE | PTFE |
| 4 | Ball | Nickel-Plated Brass | CW603N | C36000 |
| 5 | Stem | Brass | CW603N | C36000 |
| 6 | Sealing Ring | NBR | NBR | NBR |
| 7 | Stem Packing | PTFE | PTFE | PTFE |
| 8 | Packing Gland | Brass | CW603N | C36000 |
| 9 | Handle | Steel | -- | A107 |
| 10 | Handle Nut | Steel | -- | A107 |
| mm | 15 | 20 | 25 | 32 | 40 | 50 | |
| In | ½ | ¾ | 1 | 1¼ | 1½ | 2 | |
| L | 54 | 61 | 72 | 80 | 88 | 102 | |
| B | 12.7 | 13.6 | 17 | 16 | 18.5 | 20 | |
| C | 15 | 19 | 22 | 30 | 32 | 42 | |
| H | 51 | 54 | 61 | 67 | 82 | 89 | |
| D | 105 | 105 | 130 | 130 | 150 | 150 | |
| Weight | Lbs | 0.60 | 0.79 | 1.17 | 1.57 | 2.16 | 3.29 |
| Kg | 0.27 | 0.36 | 0.53 | 0.71 | 0.98 | 1.49 | |
Freezing Weather Precaution: Subsequent to testing a piping system, valves should be left in an open position to allow complete drainage.
Each TALOAR brass valve has beenthoroughly cleaned and degreasedand packed separately in the sealedpolythene bag.
Copyright © TALOAR All Rights Reserved
