PN40/600PSI/Class300
Full-Bore, Chrome-Plated Ball
BSEN12288, Threaded Ends Comply to BS21 or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 6.0Mpa/60Bar |
| Seat | 4.0Mpa/40Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 4.0 Mpa at -20°C-100°C |
PN40/600PSI/Class300
Full-Bore, Chrome-Plated Ball
BSEN12288, Threaded Ends Comply to BS21 or ANSI 2.1
| Hydraulic Pressure Test | |
| Body | 6.0Mpa/60Bar |
| Seat | 4.0Mpa/40Bar |
| Pressure Ratings |
| 0.9 Mpa at 180°C |
| 4.0 Mpa at -20°C-100°C |
| No | Part | Specification | BS EN | ASTM |
| 1 | Body | Cast Bronze | 1982 CC490K | B584 CA844 |
| 2 | Ball | Brass | 12164 CW603N | B16 CA360 |
| 3 | End Cap | Cast Bronze | 1982 CC490K | B584 CA844 |
| 4 | Thrust Washer | PTFE | PTFE | PTFE |
| 5 | Seat | PTFE | PTFE | PTFE |
| 6 | Stem Packing | PTFE | PTFE | PTFE |
| 7 | Packing Gland | Brass | 12164 CW603N | B16 C3600 |
| 8 | Stem | Brass | 12164 CW603N | B16 C3600 |
| 9 | Handle | Steel | A107 | |
| 10 | Handle Nut | Steel | A107 | |
| 11 | Handle Sleeve | PE | VINYL |
| mm | 15 | 20 | 25 | 32 | 40 | 50 | |
| In | ½ | ¾ | 1 | 1¼ | 1½ | 2 | |
| A | 54.5 | 62 | 73.1 | 82.5 | 91.7 | 106.5 | |
| B | 46 | 55 | 62 | 70 | 75 | 82 | |
| C | 82 | 103 | 105 | 106 | 150 | 160 | |
| D | 12.7 | 19 | 25 | 31 | 38 | 50 | |
| Weight | Lbs | 0.53 | 0.82 | 1.39 | 1.54 | 2.87 | 4.15 |
| Kg | 0.24 | 0.37 | 0.63 | 0.70 | 1.30 | 1.88 | |
Freezing Weather Precaution: Subsequent to testing a piping system, valves should be left in an open position to allow complete drainage.
Each TALOAR bronze valve has beenthoroughly cleaned and degreasedand packed separately in the sealedpolythene bag.
Copyright © TALOAR All Rights Reserved
